Etched Slate - Aloha Summer!

Wherever you live, celebrate the joys of Hawaii at home with this etched slate plaque!

You will need:

etchall® crème

etchall® etchmask and transfer paper

Slate, 5” x 7”

Squeegee

Pik tool

Swivel blade craft knife, or a digital cutting machine

Pattern

 

1. Download the pattern onto your computer, then either print, or upload to your cutting software.

2. Cut the pattern from etchmask using your digital cutting machine, or cut around the traced design with a swivel blade craft knife. It is only necessary to cut the vinyl, not the backing paper.

 

3. Use the pik tool (or the point of a craft knife) to remove the areas of the design that will be etched. Insert the tip of the knife into the vinyl away from the cut edge, then lift gently.

 

 

4.   Once all areas to be etched have been exposed, cover the top of the etchmask with transfer paper.  Press firmly onto the etchmask, then carefully peel the backing sheet away from the etchmask.

 

 

5.  With the transfer paper facing up, position then press the etchmask firmly onto the slate then remove the transfer paper.  Make sure that all areas of the slate not to be etched are completely covered. Use pieces of transfer paper on the edges or corners as needed.

 

 

 

6. Cover the open areas liberally with etching crème. NOTE: etchall etching crème is reusable, so you cannot use too much. Use the squeegee to spread the crème across the open areas on the slate.  After 10 minutes, use the squeegee to move the crème around a little being careful not to touch the slate surface. 

 

 

7. After an additional 5 minutes, scrape the crème back into the container then rinse the slate and remove the etchmask to reveal your etched design.

 

 

NOTE:  etchall etching crème creates a permanent etch on slate, glass, ceramic, mirror, porcelain and other glazed surfaces. Please read directions thoroughly. Do not rinse over a porcelain sink, or work on a glazed countertop (granite, etc). Even a small amount of etching product will permanently etch any of these surfaces. 

 

        Use etchall etching crème and dip to customize glass, mirror, china, or slate pieces for your home, or to give as a gift. You can also use stencils to create the designs of your choice!  Search "glass etching" in the search bar on my blog for more project ideas.  Enjoy!

Yours truly,

Julie 💝

KEEP CALM AND CARRY ON ETCHING!

etchall® products were provided by B&B etchall.  Check their website for the full product range.

Use code  BELLA622  for 20% off your order

The slate was purchased from my local Michaels store. Some surfaces are also available online.

  I receive a small endorsement fee for featuring my etched projects on my blog.

Light Up Your Parties!

Add a few tea light mugs to your party table,
made even more special with StyleTechCraft® vinyl accents and etchall® etching dip'n etch!

You will need:

StyleTech Transparent Vinyl - one sheet each of red and blue

2 Tea light glass mugs

etchall® dip'n etch glass etching liquid

Transfer paper 

Paper trimmer, or craft knife and metal edge ruler

Digital cutting machine, or star punch

Painters tape

Instructions:

1. Remove the lid and tea light fitting from each mug then wash and dry the mugs thoroughly. Fill one mug with dip'n etch. Following directions on the container, let sit for 15 minutes then carefully pour the liquid from the first mug into the second.  After 15 minutes, pour the liquid back into the container to be used again.  Rinse the mugs thoroughly.  

Note: Place painters tape around the inside of the top of the mug to prevent the liquid from etching that area as you pour out the dip'n etch. 

See the difference that etching makes!

2. Using a paper trimmer, cut four, 1/2" wide strips of red vinyl. Trim to the length needed to fit around the outside of the mug.  Peel away the backing from each strip, then with the strips spaced about 1/2" apart, adhere to the outside of one of the mugs.

3. Using a digital cutting machine, create a 3" wide border of 1/2" stars, 1" apart as shown on the blue vinyl.  While the vinyl is still on the mat, weed (remove) the stars.  Note: Measure around the glass to determine how long the star border strip needs to be.  This strip measured 3" x 10".

4.  In order to place the border on one of the glasses, cover the border with transfer paper then remove  from the mat.

5. Remove the backing from the blue vinyl then, with the blue vinyl against the glass, carefully position around the glass mug, starting at the handle.  Press in place making sure there are no creases, then remove the transfer paper.

Replace the tea light fittings, add tea lights and the top - Time to party!

StyleTech vinyl is available in a variety of styles and colors.  Check their website @ StyleTechcraft.com for more information.

I received these samples of vinyl and etchall dip'n etch at no charge from the manufacturers to create a project to share with my readers.  Check the DCC  links to see more projects created by Designer Crafts Connection members featuring StyleTech vinyl.  Enjoy!

Y'all come back now.........

Yours truly,

Julie 😊

KEEP CALM AND CARRY ON CRAFTING!

Etched Chalkboard Slate

This project was created for the etchall® & StencilGirl blog hop.  Each designer received product to create a project using etchall re-usable etching crème and stencil spray together with their choice of stencils from StencilGirl. 

Most people think of glass, or mirror as a surface for etching, so I thought it would be fun to show how etching creme can also be used to etch designs on slate...

You will need the following supplies:

• etchall® etching crème
• etchall® reposition/reuse stencil spray
• etchall® squeegee
• StencilGirl Stencil
• Chalkboard
• Waverly chalk paint - White
• 18 gauge wire - 15"
• Folk Art glitter paint - Unicorn
• Foam brush
• Painters/masking tape

Instructions:

1. Following directions on the container, spray the back of the stencil with stencil spray. Place inside a box to avoid overspray, or spray outside, weather and temperature permitting.  Let dry for a few minutes.  The stencil will become tacky.

2. Position the stencil on the chalkboard then press firmly in place using the squeegee. Tape around the edges of the stencil and cover exposed areas of the chalkboard.

 

3.  Pour etching creme onto the painters tape above the stencil, then spread over all open areas with the squeegee. Let sit for 15 mins.

 

4.  etchall etching creme is reusable. After 15 mins, scrape the creme back into the container.  Remove any remaining residue with a damp paper towel, or cloth then remove the tape and stencil. Wipe over the slate one more time if needed.

 

5.  Position tape on top of the slate along the inside edge of the frame, then paint the frame with chalk paint. Chalk paint requires no prep, so you can paint directly on top of the wood. When the paint is dry, remove the tape. 

 

6.  Spread glitter paint sparingly on top of the frame to create a sparkly, frosty look. Let dry then make two holes at the top of the frame; one in each corner.  Use a small screw and screwdriver to make the hole. Push the tip of the screw into the wood then use the screwdriver to turn the screw thru to the opposite side.  Back the screw out of the wood.

  

7.  To create the hanger, wrap one end of the wire around the foam brush handle to curl. Push the opposite end thru the hole in front of the frame, curve then push thru the hole from the back to the front at the other corner.  Curl the end.  Option: Place a small washer over each opening, so the curled wire doesn't scratch the paint.

8.  Use colored chalk to write the word "Winter" at the top of the slate and the month and day at the bottom.  My granddaughter also thought it would be fun to dot the letter "I" in Winter with an adhesive acrylic jewel and we also added one to each button.

This side of the frame is for the Winter season, which ends on March 20th. The other side can easily be decorated for Spring and a second chalkboard can be decorated for Summer and Fall.

Stencils are a great way to add custom, etched designs to many surfaces using etchall® etching crème. This project is one of many created for the StencilGirl & etchall blog hop.  A list of all the participating blogs is below featuring some wonderful projects. I hope we've inspired you to try some of these ideas for yourself - Time to get your creativity on!

Carol Baxter
Sandee Setliff
Louise Nelson
Terry Ricioli
Christie Troxell

Steph Ackerman
Julie McGuffee  *You are here

DAY 1

Mary Beth Shaw
Gwen Lafleur
Mary C. Nasser
Debi Adams
Tina Walker
Cindi McGee

Nadine Carlier  
Joe Rotella  

DAY 2

Belen Sotelo
Cindy Gilstrap
Kiala Givehand
Janet Joehlin
Anita Scroggins
Erin Reed
Candy Rosenberg
Susie Bentz

GIVEAWAY
One lucky winner will receive an etchall® Glass Etching Bee-ginner Kit,
reposition/reuse stencil spray
AND a $25 Gift Certificate to StencilGirl Products!
Enter to win by leaving a comment below.
Then be sure to visit the other blogs in the hop and comment to win.
The more blogs you comment on, the more chances you have to WIN!
One winner will be chosen at random from all blog comments!
(One comment per blog please.)

You have until Tuesday, March 20th at 11:59PM Central Time to leave your comments.
Winner will be announced on
StencilGirl's Facebook page and etchall’s Facebook page on Wednesday, March 21.

Can't wait to get started?  Then this is for you!

Y'all come back now........

Yours truly,
Julie

KEEP CALM AND CARRY ON CRAFTING!

Father's Day!

It's Father's day in 2 weeks, so here's a gift you can make in jiffy that dad will definitely enjoy!

 

You will need the following supplies:
        Glass mug (I got this for about $2 at Walmart)
        etchall® glass etching crème (link in sidebar)
        etchall® etchmask & transfer paper
        Swivel knife and pik tool
        Pattern or stencil

1.  Create the design using fonts installed on your computer, or die cutting machine software (best option) then cut. You can also create the pattern in Word, print then trace onto the etchmask.  Cut with a swivel blade.

        

NOTE:  Measure the area where you want to etch the design then center the design on your stencil. This will help when it's time to position the stencil on the side of the mug. For example, if you want the design to be 1" below the rim of the glass and 2" to the right of the handle, make sure there is a 1" border above the design and 2" from the left edge on your stencil. 

2.  Cut a piece of transfer paper the same size as your stencil. Remove the backing paper then cover the top of the stencil with the transfer paper.  Remove the backing from the yellow etchmask.

 

 3.  With the top edge of the stencil aligned with the rim of the glass mug, place the stencil on the side of the glass. Press firmly in place.  Carefully remove the transfer paper.

             

4.  Use a pik tool, or point of a craft knife to carefully remove the letters to reveal the design to be etched. Use the transfer paper and pieces of backing paper to cover all other areas of the glass to prevent accidental etching.

5.  Balance the mug so it doesn't roll then cover the open areas in the stencil with a liberal amount of etching crème.  I use a plastic spoon to to add the cream.  NOTE: This product is reusable so you can't use too much! 

6.  After 15 minutes, scrape the etching crème back into its container then rinse the mug under warm, running water. DO NOT do this over a porcelain sink!  This is an etching product and it will etch your sink too!  Be aware of your surroundings when working with etching product.  Do not work on a granite, quartz or slate countertop, or they may be etched too!  I work on a laminate countertop.

7.  Remove the stencil then polish with a soft cloth to reveal your perfectly etched design.  Fill with dad's favorite drink and enjoy!  Cheers y'all!

Yours truly,

Julie :)

KEEP CALM AND CARRY ON CRAFTING!

Night Light

Create a candlestick night light with a custom shade for a guest room, or any room in your house.

I started with a 12", glass candlestick and products I use for glass etching.

My theme was stars, so the first step was to create a star design on the base of the candlestick as follows:

1. Using a small punch, I cut stars from extra pieces of etchmask® then adhered them to the base.  To help place the stars evenly, place the base on top of a mat with a grid and use the guidelines visible thru the glass as a guide.

2. To etch the base, place the candlestick in a plastic dish deep enough to accommodate the base and about 1" larger. Carefully pour dip'n etch glass etching liquid into the dish until only the base is covered.  Pour to one side of the dish, not directly onto the glass. Leave for 15 minutes then remove the candlestick. Rinse and remove the stars, then pour the dip'n etch back into the container. Remember, etchall dip and crème are re-usable.  NOTE: You can also etch the base by covering with a liberal coat of etching crème.

The candlestick is now perfect for displaying an LED candle, but we can also add a custom shade in place of a candle.

You will need a Lighten Up kit from www.etchall.com plus fabric. I used Fairfield OlyFun™ fabric. Available in solid colors, this fabric does not stretch or fray when cut. It's easy to work with and the weave allows light to shine thru. You will also need white glue, a sponge brush and trim.

1. Use the template included in the kit to cut the fabric. Cover the outside of the shade with an even coat of glue, then press the fabric in place.  Let dry then glue trim to the bottom and top edges of the shade.  Cut stars from paper then glue to the inside of the shade.  They will be visible when lit.

2.  Following instructions provided in the kit, add the batteries and and replace the cover. Push the button to switch on. The shade will only light up when the center (underneath) is depressed since it is designed to work when placed on top of a bottle. To keep the center depressed (and the light on), insert 2 ends of a toothpick into the edge around the center button as shown. Use the small button to switch the light on and off.

Light up your life and enjoy!  Y'all come back now........

Yours truly,

Julie :)

KEEP CALM AND CARRY ON CRAFTING!